Skip to main content
HAWK IoT

Industry

2G Network Sunset: What Fleet Operators Should Check

Older trackers often rely on 2G. Here is how to audit your devices and plan a smooth move to 4G before coverage disappears.

By HAWK IoT · · 1 min read

Mobile operators around the world are switching off older networks to reuse spectrum for 4G and 5G. Trackers that only support 2G stop reporting when that happens, often with little warning for the fleet owner.

Step 1: Audit your installed base

List every tracker by model and network technology. The device datasheet or label will show whether it supports 2G only, or 4G with or without 2G fallback.

Step 2: Check operator plans in each country

Shutdown timelines differ by operator and by country. Ask your SIM provider for their published plans for the markets where your vehicles operate.

Step 3: Prioritise by risk

Start with vehicles where losing tracking would hurt most: high-value assets, vehicles under finance and those that cross borders.

Step 4: Choose replacement hardware carefully

  • Confirm LTE bands for every country you operate in
  • Check whether LTE Cat 1 or LTE Cat M1 suits your use case
  • Keep the same inputs and accessories where possible to simplify reinstallation
  • Confirm the new model is supported by your tracking platform

Step 5: Plan the changeover

Replacing trackers is a good moment to review installation quality, accessory needs and platform configuration. A phased plan keeps vehicles on the road while devices are swapped.

Our team can review your current devices and recommend 4G replacements. Contact us with your device list to get started.

More insights

Guides

How to Choose a GPS Tracker for Your Fleet

Wired, OBD or battery-powered? A practical checklist for choosing tracking hardware that fits your vehicles, your network and your goals.

Read article

Let’s Build Smarter Connected Solutions.

Tell us about your vehicles, assets and goals. Our team will recommend the right hardware and platform setup.